Parque Agroalimentario L'Alcudia
03290 Elche
T. 966 624 003
ympackaging@ympackaging.com



Multihead weigher




KNOWN FOR HIGH PRECISION


From our origins, YM has designed and manufactured high quality multihead weighers for all industries. Our weighers are manufactured by following an intense quality control process. Our software is designed to work in an intuitive and practical manner.

We have a wide range of models and types of weighers that allow us to meet our clients demands depending on the characteristics of their products. Our weighers start from 8 heads for slow-medium speeds and go all the way up to 32 heads for high speeds.

Our multihead weighers have a statistic system that allow us to extract the production data that the client might need such as total packed weight, correct weights percentage, weight deviations, etc.

Many factors that must be considered when purchasing a multihead weigher for its correct operation with different product are as follows: 1 – volume of hoppers (we can offer hopper sizes from 0.5L to 8L) , this will depend on the products dimensions, 2 – surface fuinish (Teflon coated, dimpled, different materials, SS304, 316, silicone, etc.) 3 – vibratory feeding pans with different shapes and features such as auger screw to feed sticky products . 4 – exclusive software for certain products.

With our new generation of multihead weighers we can offer unique benefits such as product infeed camera, hopper opening via motorised movement (no springs), IP66 for high demanding cleaning process, special software and hardware for higher weight control, etc.

At YM we also manufacture mixing weighers that allow us to weigh 1 or more products simultaneously. This weigher comes with a special 4-way opening timing hopper designed for multiproduct doses and/or single product at high speeds to one single discharge point. These weighers are unique due to their high accuracy and speed that they offer thanks to their memory hoppers.



Anti-vibration design in the load cells and advanced filter software. .



Special and customised application

Certain products need to be handled with higher requirements and more specific and customized finishes.


For example, to achieve high quality ice and avoid its breakage the weigher must have some essential features to do so.


Dusty products such as charcoal cause an excessive wear on bearings, seals and load cells, for this reason the weigher must be prepared.


Rubber or elastic products require a special customisation in the vibratory system, both mechanically and electronically.


We have a special model for long stick products. This multihead weigher channels the product in a way that the feed into the bagger is in a vertical position.

Product Mixing .


This system is designed to weigh each product with an exact weight. Ideal for products such as nuts, snacks, candy, etc.

Product Mix of 2/3/4/5 at high speed and accuracy

Different feeding types.

GENERAL CHARACTERISTICS

This weigher meets both efficiency and high technology. It has 10 vibratory pans that feed, into the 10 weighing hoppers to calculate a weight combination using our advanced algorithms. Once the weigher finds the exact weight, a mechanically controlled discharge occurs in order to dispense the product into the final cone. From here the product enters the bagging machine or the relevant packing system. Thanks to its fast processor, the weigher is capable of working out over 2000 combinations per second before selecting the most accurate one.
We can achieve medium-high speeds with these combinations of up to 60 ppm.

The machine is operated using a 7” HMI where all operational parameters can be edited in a user friendly manner.

This machine offers high speeds and reliability. It has 14 vibratory pans that feed into the 14 weighing hoppers to calculate a weight combination using our advanced algorithms. Once the weigher finds the exact weight, a mechanically controlled discharge occurs in order to dispense the product into the final cone. From here the product enters the bagging machine or the relevant packing system.

Thanks to its fast processor, the weigher is capable of working out over 60000 combinations per second before selecting the most accurate one.
We can achieve medium-high speeds with these combinations of up to 115 ppm.

The machine is operated using a 7” HMI where all operational parameters can be edited in a user friendly manner.

Todo este proceso se realiza en milisegundos para poder garantizar más de 180 descargas por minuto. Además del pesado de monoproducto, este equipo puede realizar pesadas mixtas de distintos productos como se muestra en las características.

This machine is designed for high speeds and it’s made of 18 hoppers. From the vibratory pans, the products falls into the feeding hoppers and then into the weighing hoppers. The last layer of hoppers is the one that has the load cells.

Once the load cells read the weight in each hopper they create thousands of possible combinations to then select the most accurate one. After the weight is selected the product is discharged.

This process is carried out in miliseconds in order to guarantee more than 180ppm. This machine can work with single product or with product mix as states in the characteristics table.


MULTIHEAD WEIGHERS

From our origins YM Packaging has designed and manufactured high quality mulithead weighers for a wide range of industries and products. Our weighers are manufactured following a strict quality control and our software is designed to work in an intuitive and practical manner.

We have a wide range of models and types of weighers. Depending on the products’ characteristics we can offer our clients a weigher that allows us to meet and exceed the expectations and conditions required.

We have weighers ranging from 8 hoppers for low to medium speeds to 32 hoppers for high speeds.
Our weighers have a statistic system that allows us to obtain production data that might be needed such as total packaged weight, percentage of correct weights, weight deviation, etc.

When acquiring a weigher there are many factors that must be considered to guarantee the correct operation of the machine with different products: hopper volume (ranging from 0,5L to 8L this will depend on the product size), superficial finishes (Teflon, dimple plates, different stainless steel, silicone, etc.) , vibration pans with different shapes and other systems like screw feed for sticky products, exclusive software, etc.

With the new generation of multihead weighers we can reach very advanced technology such as camera system to view the product, hopper opening with motorized arm (not springs), IP66 for high cleaning standards, special software and hardware for high control of weight, etc.

At YM Packaging we also manufacture multihead weighers for mixing products. This weigher allows us to weigh 1 or more products at the same time. It has a special timing hopper with 4 gates designed to drop the multi products separately or one single product at high speeds to one discharge point.

This weighers stand out due to their speeds and high accuracy that the memory buckets allow. These buckets act like a pool of possible combinations. Furthermore, we work with the load cell brand HBM to ensure high accuracy and reliability.

RELATED VIDEOS


Contact us

 

We help you choose the solution that best suits your needs
Tell us your contact information and soon we will offer you the requested information.

Name

Company

Email

Phone / Movil

Product (s) to be packaged

Quantity to dose

Type of container

Dimensions of the container

Speed ​​required

Message